Features : ●Colorful touch interface (HMI), the operation is simple and convenience. ●Suitable for DIW, water-based cleaning agents, water-solvent. ●Multi-stage filter, can surely filter tin stains and FLUX to ensure cleaning agents function. ●Applicable to multiple sizes of SMT-stencil, screen, PCB at the same time. ●The material of tank : SUS304 Specification : NO. | Contents | USS750 ULTRASONIC STENCIL/ SCREENS CLEANING MACHINE | USS1200 ULTRASONIC STENCIL/ SCREENS CLEANING MACHINE | 1 | Machine Size(W*D*H) | 850 * 1100 * 2200 mm | 1000 * 1620 * 3100 mm | 2 | Spraying Tank Size(W*D*H) | 240 * 930 * 840 mm | 400 * 1400 * 1350mm | 3 | Suitable Stencil | 300 * 300mm - 750 * 750mm | 750 * 750mm - 1200 * 1200mm | 4 | Operation Method | HMI | HMI | 5 | Suitable Agents | DIW/Water-based Cleaning Agent | DIW/ Water-based Cleaning Agent | 6 | Ultrasonic Power | 1200W / 40KHz | 1200W / 40KHz | 7 | Heater of Cleaning Tank | 1" / 2KW / L : 300mm * 1 PCS | 1" / 2.5KW / L : 300mm * 2 PCS | 8 | Capacity of Cleaning Tank | 80L | 150L | 9 | Drying System | Hot Air Drying | Hot Air Drying | 10 | Heater of Drying | 220V / 1KW * 3 PCS | 220V / 1KW * 4 PCS | 11 | Exhausting Hole | 4"* 2 PCS | 4"* 2 PCS | 12 | Agent Inlet Pump | 3/8" TFL-P038 | 3/8" TFL-P038 | 13 | Agent Filtering Pump | HCM75L | HCM75L | 14 | Spraying System | 1HP Pump 1Ø Both-side Spin-spraying | 1HP Pump 1Ø Both-side Spin-spraying | 15 | Pressure Valve | 1/4" | 1/4" | 16 | Filter of Cleaning Agent | 10"SUS Filter * 2 SETS | 10" SUS Filter * 2 SETS | 17 | Filter of Wasted Water Drain | 10" SUS Filter * 1 SET | 10" SUS Filter * 1 SET | 18 | Filter of Spraying System | 10" SUS Filter * 1 SET | 10" SUS Filter * 1 SET | 19 | Water Inlet Pipe | 3/4" | 3/4" | 20 | Cleaning Agent Drain Pipe | 3/4" | 3/4" | 21 | Wasted Water Drain Pipe | 3/4" | 3/4" | 22 | Operation Signal | Red/ Yellow/ Green | Red/ Yellow/ Green | 23 | Machine Material | SUS304 | SUS304 | 24 | Machine Weight | 303KGS | 520KGS | 25 | Max Power | 7.6KW | 23KW | 26 | Voltage | 220V 1Ø (40Amp) | 220V 1Ø (40Amp) | 27 | Air Consumption | 200-500L/min | 200-500L/min | 28 | Air Blowing System | 10 SETS(Optional) | 10 SETS(Optional) | Process : ●Power On→Temp. Setting→Time Setting→Setting Finished→Door Open→Stencil Put In→Door Close→Meet Start Conditions→Cleaning Start ●High-pressure Spraying→Ultrasonic Cleaning→Hot Air Drying ●Cleaning Finished→Yellow Light On→Buzzer On(Short)→Door Open→Stencil Take Out Application : ●Cleaning for SMT-stencil, screen, PCB and any form of fine pitch stencil.
|